Answered By: Stuart Gibbs
Last Updated: Oct 11, 2016     Views: 48

1)  To the left of the Lightboard there is a cart containing two microfiber cloths.  When you are ready to erase the board use the microfiber cloth marked 'Dry' first to wipe off the marker residue. 

2)  Next, lightly spray the Vinegar and Water solution onto the board and use the 'Wet' microfiber cloth to clean any remaining residue.   


3)  During the recording if you need to erase a small mistake you may use the Expo Erasers or the small black cloth cleaners located on the cart.